Sun Microsystems GigaSwift Ethernet Adapter Installation And User Manual page 94

If nothing is reported back on SUNWced or SUNWcedx, then proceed to Step 4 and
select SUNWcea, SUNWceax, SUNWced.u, SUNWcedx.u, SUNWcedu, and SUNWcem
(if present).
If nothing is reported back for SUNWvld or SUNWvldx, then proceed to Step 4 and
select SUNWvld, SUNWvldx, and SUNWvldu packages.
If nothing is reported back, then proceed to Step 4 and select "all" packages.
4. Install the software packages by typing the following at the command line,
replacing the OS_VER with your version of the Solaris operating system:
If your system is running Solaris 7 or 8 software type the following:
# /usr/sbin/pkgadd -d /cdrom/cdrom0/GigaSwiftEthernet/Solaris_OS_VER/Packages/
Where OS_VER is 7 or 8
For example, if your system is running the Solaris 8 operating system, you would
type the following:
# /usr/sbin/pkgadd -d /cdrom/cdrom0/GigaSwiftEthernet/Solaris_8/Packages/
If your system is running Solaris 9 SPARC software type the following:
# /usr/sbin/pkgadd -d /cdrom/cdrom0/GigaSwiftEthernet/Solaris_9/Sparc/Packages/
72 Sun GigaSwift Ethernet Adapter Installation and User's Guide • August 2004