Sun Microsystems GigaSwift Ethernet Adapter Installation And User Manual page 38

Gigaswift ethernet adapter

Table of Contents

4. Execute the installation script:

# ./install

The script displays a menu of products:

5. Select 2, the Sun GigaSwift Ethernet adapter, and answer the questions, if

required, in the installation script.

Note – After the installation script runs, you see a summary of the software package

or patch that was installed. You can also find a log of the installation in /var/tmp.

The log file information is displayed when the installation completes unless the

software meets or exceeds the required package or patch level.

Example 1: All Requirements Met on SPARC Systems

Following is an example of an installation script output if the driver and patch

requirements are met on SPARC systems:

CODE EXAMPLE 2-1

GigaSwift Ethernet Adapter Driver for sparc Installation.

Use is subject to license terms.

Sun GigaSwift Ethernet Adapter Installation and User's Guide • August 2004

Product Installation

1 - Dual Gigabit Ethernet Dual SCSI/P Adapter

2 - GigaSwift Ethernet Adapter (copper/fiber)

3 - GigaSwift Ethernet Compact PCI Adapter

4 - Quad GigaSwift Ethernet Adapter

Please select the product to install: 2

Script Output for SPARC Systems When Requirements Are Met