安裝
1. 縫紉機拆箱搬運過程中,不可扶持針座板①
下方。( 圖 6)
2. 依本機所附桌板裁製圖及零件組合圖所列之
配件,依序安裝防震機座鋁板 ②。( 圖 6)
3. 裝置導布屑及線架。( 圖 7)
INSTALLATION
1. While unpacking and moving the sewing
machine, do not hold under the stitch seat
plate1 .(Fig.6)
2. Based on the accessories attached with
the table cut-out drawing and components
drawings, install the shockproof machine
bed aluminum plate1. (Fig.6)
3. Install the waste fabric guide and the thread
stand. (Fig.7)
Introduction
圖 6 / Fig. 6
圖 7 / Fig. 7
P6