The Relationship Between Needle And Looper - Siruba 700KS Instruction Book

針與勾針之關係
1. 針與上勾針之關係
當上勾針移至最左時，勾針尖端與針中心距
約 4.4 ~ 4.7mm ，雙針時其左針中心與勾
針尖端距約 5.4 ~ 5.7mm 。( 圖 29)
2. 針與下勾針之關係
(1) 當下勾針移至最左時，勾針尖端與針中心
距約 2.8~3.0mm( 雙針時以左針為主 )。
( 圖 30)
P21
THE RELATIONSHIP BETWEEN
NEEDLE AND LOOPER
1.The relationship between the needle and the
upper looper
When the upper looper moves to the leftest
point, the distance from the looper tip to the
middle line of the needle is 4.4 ~ 4.7mm.
For double needles model, the distance from
the looper tip to the middle line of the left
needle is 5.4 ~ 5.7mm.(Fig.29)
2. Relation between the needle and the looper
(1)The distance between the tip of the looper
and the center of the needle should be
2.8~3.0mm when the lower looper moves
the extreme left. (The left needle is main
while using double needles) (Fig.30)
圖 29/ Fig. 29
圖 30 / Fig. 30