Ricoh MP 7503SP Field Service Manual page 1896

3. Controller SP Mode Tables
8063 F:FIN Jobs
These SPs total finishing methods for fax jobs only. The finishing method is specified by the
application.
Note: Finishing features for fax jobs are not available at this time.
8064 P:FIN Jobs
These SPs total finishing methods for print jobs only. The finishing method is specified by the
application.
8065 S:FIN Jobs
These SPs total finishing methods for scan jobs only. The finishing method is specified by the
application.
Note: Finishing features for scan jobs are not available at this time.
8066 L:FIN Jobs
These SPs total finishing methods for jobs output from within the document server mode
screen at the operation panel. The finishing method is specified from the print window
within document server mode.
8067 O:FIN Jobs
These SPs total finishing methods for jobs executed by an external application, over the
network. The finishing method is specified by the application.
Last three digits for SP8 061 to 067
806x-001 Sort
806x-002 Stack
806x-003 Staple
806x-004 Booklet
806x-005 Z-Fold
806x-006 Punch
370
*CTL [0 to 99999999/ 0 / 1/step]
*CTL [0 to 99999999/ 0 / 1/step]
*CTL [0 to 99999999/ 0 / 1/step]
*CTL [0 to 99999999/ 0 / 1/step]
*CTL [0 to 99999999/ 0 / 1/step]
Number of jobs started in Sort mode. When a stored copy
job is set for Sort and then stored on the document server,
the L: counter increments. (See SP8 066 1)
Number of jobs started out of Sort mode.
Number of jobs started in Staple mode.
Number of jobs started in Booklet mode. If the machine is in
staple mode, the Staple counter also increments.
Number of jobs started In any mode other than the Booklet
mode and set for folding (Z-fold).
Number of jobs started in Punch mode. When Punch is set
for a print job, the P: counter increments. (See SP8 064 6.)