Instruments Mode - Siemens Solkor 7PG2113 Technical Manual

1.5 Instruments Mode

The Instrument Mode sub-menu displays key quantities and information to aid with commissioning. The following
meters are available and are navigated around by using the ▲,▼and TEST/REST buttons. The text description
shown here is the default information. Depending upon the relay model you have, you may not have all of the
meters shown.
Instrument
FAVOURITE METERS
→to view
Current Meters
→to view
Primary Current
Ia
Ib
Ic
Secondary Current
Ia
Ib
Ic
Nom Current
Ia
Ib
Ic
Pri Earth Current
In
Ig
©2010 Siemens Protection Devices Limited
0.00A
0.00A
0.00A
0.00A
0.00A
0.00A
o
0.00XIn----
o
0.00XIn----
o
0.00XIn----
0.00A
0.00A
7PG2113/4/5/6 Solkor Settings
Description
This allows the user to view his previously
constructed list of 'favourite meters' by pressing
TEST/RESET button and the READ DOWN
button to scroll though the meters added to this
sub-group
To construct a sub-group of favourite meters, first
go to the desired meter then press ENTER this
will cause a message to appear on the LCD 'Add
To Favourites YES pressing ENTER again will
add this to the FAVOURITE METERS Sub-menu.
To remove a meter from the FAVOURITE
METERS sub-menu go to that meter each in the
FAVOURITE METERS sub-menu or at its
Primary location press ENTER and the message
'Remove From Favourites' will appear press
ENTER again and this meter will be removed
from the FAVOURITE METERS sub-group
This is the sub-group that includes all the meters
that are associated with current TEST/RESET
allows access to this sub-group
This meter displays the Primary current. The
value displayed will automatically adjust between
A and kA.
This meter displays the Secondary current
This meter displays the Nominal current
This meter displays the Primary earth current.
The value displayed will automatically adjust
between A and kA.
Chapter 2 Page 9 of 21