Intended Use; Target Group - GRAUPNER mc-28 Manual

16 channel hott 2,4 ghz transmitter
Hide thumbs Also See for mc-28:
Table of Contents

Advertisement

Intended use

Target group

6 / 40
This remote-control system may only be used for the purpose spec-
ified by the manufacturer for operation of UAVs and other unmanned
remote control models. Any other type of use is impermissible and
may damage the system and cause significant property damage and/
or personal injury. No warranty or liability is therefore offered for any
improper use not covered by these provisions.
In addition, it is explicitly pointed out that you must inform yourself
about the laws and regulations applicable at your respective starting
point before starting the remote control operation. Such conditions
may differ from state to state, but this must be followed in every
case.
Notes
• In general, it is not permitted to fly over airports, factory sites,
nature reserves, built-up areas, etc.
• Where designated no-fly zones are located, and which in no way
affect them, it can be determined, for example, using the "Air-
Map" app.
Read through this entire manual before you attempt to install or use
the transmitter.
The product is not a toy. It is not suitable for children under 14 years.
The operation of the mc-28 HoTT transmitter must be performed
by experienced modelers. If you do not have sufficient knowledge
about dealing with radio-controlled models, please contact an expe-
rienced modeler or a model club.
33028_mc28_T1V3_sh_en

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents