Hidden Mode - GRAUPNER mc-28 Manual

Hidden mode

Announcements
Language change
HIDDEN MODE
VOICE
FIRMWARE UPDATE
STICK CALI.
BLUETOOTH INIT.
FILE LIST
MC-28 DUTCH.VDF
MC-28_ENGLISH.VDF
MC-28_FRANCE.VDF
MC-28_GERMAN.VDF
MC-28_ITALIANO.VDF
MC-28_SPAIN.VDF
30 / 40
The "Hidden Mode" menu can be accessed from almost any menu
item by pressing the SET button while holding down the selection
keys of the left four-way button.
These messages are in German by default. These announcements
are summarized in a voice packet which is stored in a transmitter-in-
ternal memory but they can be replaced by a voice packet of a dif-
ferent language at any time.
Here you can load user's voice files in the transmitter. These packets
must be created in the "Firmware upgrade studio" with your .wad
files and thay must be saved in your SD card.
On the included micro SD card are already available the following
languages: German, English, French, Dutch, Italian and Spanish,
Czech and Russian.
The most actual language packets are available on www.graupner.de.
Language change step by step
Insert the included memory card in its slot as described in the "Mem-
ory card" section.
Switch the transmitter on with the RF module on.
Change in the "Secret mode" menu.
Move to the line "ANNOUNCEMENT" by using the selection keys.
Select the "ANNOUNCEMENT" option with the SET key.
Select the language or your voice files packet through the selection
keys.
Confirm by pressing the SET key. The selected language packet will
be stored in the transmitter memory.
The loading process is finished as soon as the progress bar at the
lower edge of the display disappears.
When this process is finished, switch the transmitter off.
Notes
• If the warning message "RF OFF OK", the RF module is still active.
Switch the RF module off and repeat the process.
• If the data list is empty. the transmitter is not finding any valid
language data in the SD card. Verify the content of the "Voice-
File" folder in the SD card by a PC.
33028_mc28_T1V3_sh_en