Intended Use
Target Group
Package Content
This transmitter system must only be used for the purpose specified by the
manufacturer for operation of unmanned remote-control models such as
model airplanes, cars, boats, helicopters, multirotor or any UAV. Any other
type of use is prohibited and may result in significant property damage
and/or personal injury. No warranty or liability is therefore offered for any
improper use not covered by the provisions of use by Graupner/SJ or other
equipment manufacturers.
In addition, it is explicitly pointed out that you must inform yourself about
the laws and regulations applicable at your respective location and country
before starting the remote-control operation. Such conditions may differ
from state to state, but this must be followed in every case.
Note
Read through this entire manual before you attempt to install or use the
transmitter.
The item is not a toy. It is not suitable for children under 14 without adult
supervision. The operation of the transmitter must be performed by
experienced modelers. If you do not have sufficient knowledge about
dealing with radio-controlled models, please contact an experienced
modeler or a model club.
•
Transmitter mz-16 HoTT
•
Receiver GR-16 (S1047.US Only)
•
Transmitter display and programming stand
•
USB cable
•
USB adapter for receiver and sensor updates
•
1s2p LiPo transmitter battery with 4000mAh
•
Transmitter neck strap
•
Transmitter manual
Note
Graupner/SJ
works continuously to the further development of the products.
We must therefore reserve the right to change the scope of delivery in terms
of form, technology and equipment.
Page 6 of 52
S1047.mz-16-V1.0-EN