GRAUPNER mc-28 Manual page 33

SENSOR SELECT
RECEIVER
GENERAL MODULE
ELECTRIC AIR MOD.
VARIO MODULE
GPS
ESC
Receiver
RX–S QUA: 100%
RX–S ST.: 100%
RX–dBm: –33dBm
TX–dBm: –33dBm
V–PACK: 10ms
RX–SPG.:4.8V TMP
M–RX V :4.6V +22°C
33028_mc28_T1V3_sh_en
Depending on the connected modules and sensors, several select-
able displays will appear. The description of these displays is con-
tained in the manual included in the sensor package.
The transmitter recognizes automatically the sensors. You can view
the sensors by changing from the main menu to the telemetry menu.
The sensors will be listed in the display and marked with a check-
mark.
This display offers a graph of the data from the display "RX DATA-
VIEW" of the "Telemetry" menu "SETTINGS, DISPLAYS".
Value Explanation
RX-S Quality expressed as a percentage of the signal
QUA packages from the transmitter arriving at the
receiver
RX-S ST Signal strength expressed in percentage of the signal
from the transmitter arriving at the receiver
RX-dBm Level in dBm expressed as the percentage of the
transmitter signal arriving at the receiver
V PACK Level in dBm expressed as the percentage of the
receiver signal arriving at the transmitter
TX-dBm Shows the longest time in ms in which the data
packets are lost during a transmission from the
transmitter to receiver
RX-VOLT Current operating voltage of the receiver power
supply in Volts
M-RX V Lowest operating voltage of the receiver power
supply since the last startup in Volts
TMP The thermometer visualizes the current operating
temperature of the receiver
33 / 40