Table of Contents
Advertisement
Installation, electrical connection and operation
2.5 Operation
Operating areas
The push button sensor 3 basic consists of up to 3 control surfaces, depending on the device
variant. The control concept of a control surface can be configured in ETS for the functions
"Switching", "Dimming", "Blind", "Value transmitter" and "Scene extension". The control concept
is defined as "Rocker". With the rocker function, one control surface is divided into two actuation
pressure points with the same basic function.
The push button sensor 3 basic is equipped with two red status LEDs per control surface (left &
right), which are always controlled identically. The LEDs can be switched on continuously - as
an orientation light, for example - or also switched off - for example in bedrooms.
The labelling field illumination of the pushbutton sensor can be permanently on or off.
Furthermore, slow flashing of the labelling field illumination indicates an incorrectly loaded
application program or an unprogrammed state as supplied.
Order No. 5111 00
Page 11 of 23
Order No. 5112 00
Order No. 5113 00
Advertisement
Table of Contents
