Change Configuration - PROEMION CanLink GSM 5 Series Preliminary Manual

CANlink GSM / UMTS 5xxx Device Manual
PRELIMINARY 5 Operation
5.2

Change configuration

The RMsys Configurator software allows you to configure the device via CAN (e.g.
with the help of a CANview USB) or remotely via a Proemion connection (Real-time
connection).
Remote configuration is only possible with a real-time connection. If your Proemion
account does not include real-time access and you wish to use this feature, please
contact Proemion.
To enable remote configuration, perform the steps described in chapter 4.6.
You have the possibility to add communication objects to the object dictionary and
to configure each object.
The objects in the object dictionary are organized in groups. You have the
possibility to add several different groups, as described in chapter 5.2.1.
For the time being, we will focus on the Custom CAN Communication group.
However, all other group and entry types are created and configured in the same
way.
For further information on using RMsys Configurator, please refer to the respective
Software Manual.
64
PROEMION GMBH, Phone: +49 661 9490-600, Fax: -666, info@proemion.com, proemion.com