Make Communication Settings - PROEMION CanLink GSM 5 Series Preliminary Manual

PROEMION GMBH, Phone: +49 661 9490-600, Fax: -666, info@proemion.com, proemion.com
4.3.1

Make communication settings

The first step is to define the communication between the PC and the CANlink
GSM / UMTS device.
Fig. 4-11 RMsys Configurator –Settings
1. In the RMsys Configurator main window, select
Options > Settings > Communication Settings
 The Communication Settings window opens.
Fig. 4-12 RMsys Configurator – Communication Settings window – Change view mode
This window has two different view modes: normal or expert view mode.
For the initial configuration, it is essential to ensure the following settings in
the expert view mode.
2. To switch to expert view mode, select
CANlink GSM / UMTS 5xxx Device Manual
PRELIMINARY 4 Getting started
.
.
View Mode > Expert
40