Gsm/Umts Antenna - PROEMION CanLink GSM 5 Series Preliminary Manual

PROEMION GMBH, Phone: +49 661 9490-600, Fax: -666, info@proemion.com, proemion.com
CAUTION
Danger due to absorption of RF energy
Mobile communication devices may pose a health risk when operated in the
close proximity of persons.
► Install the antenna(s) used for the CANlink GSM / UMTS 5xxx devices to
provide a separation distance of at least 20 cm / 8 inches from all persons.
► Do not operate them in conjunction or co-locate them with any other antenna
or transmitter.
NOTICE
Operation without antennas can destroy the radio modem.
► Do not operate CANlink GSM / UMTS 5xxx without antenna(s).
► To avoid damage to the CANlink GSM / UMTS 5xxx, connect/disconnect the
antenna(s) only if the power supply to the device is switched off.
► Do not mount the antenna(s) inside enclosed metal constructions such as
driver cabins because of the Faraday cage effect.
► Do not shorten or lengthen the cable of the antenna(s).
For detailed information on the device connectors, refer to chapter 3.2 Connectors.
4.2.1.1

GSM/UMTS antenna

1. Make sure that the device's power supply is switched off.
2. Connect the antenna's FMA connector to the device's GSM/UMTS
connector.
Apart from the GSM/UMTS/GPS combi antenna, there are different GSM/UMTS
antennas available for CANlink GSM / UMTS 5xxx. For a list of suitable antennas,
see chapter 1.2.3 Software and accessories or contact our sales team:
sales@proemion.com
CANlink GSM / UMTS 5xxx Device Manual
PRELIMINARY 4 Getting started
35