8-Pin M12 Can/Power & I/O Connector - PROEMION CanLink GSM 5 Series Preliminary Manual

PROEMION GMBH, Phone: +49 661 9490-600, Fax: -666, info@proemion.com, proemion.com
3.2.1.2 8-pin M12 CAN/power & I/O connector
The table and drawing below show the pin assignment of the 8-pin M12 connector.
The colors stated in the table below are the conductor colors of the cable listed in
the section Accessories and provided in the Starter Kit.
CAN/power connector
8-pin M12, male, A-coded, front view
Pin Designation
1 Analog IN 1
2 Analog IN 2
3 Digital OUT 1
4 Digital OUT 2
5 CAN-High
6 CAN-Low
7 VCC 6 ... 32 V DC
8 Ground
Fig. 3-2 8-pin M12 CAN/power & I/O connector with pin assignment
The additional I/Os consist of two analog inputs that have an input range of
0...10 V DC. Optionally they can also be used as digital inputs with a maximum
input voltage of up to 32 V DC.
The short-circuit proof digital outputs are PnP switching and can be diagnosed by
the CANlink GSM / UMTS 5xxx device. They will apply the supply voltage of the
device to the output pins and are able to provide a current of up to 500 mA.
CANlink GSM / UMTS 5xxx Device Manual
PRELIMINARY 3 Functionality and features
Color Description
White I/O
Brown I/O
Green I/O
Yellow I/O
Grey CAN
Pink CAN
Blue Power supply
Red/shield Power supply
21