Connecting To Proemion - PROEMION CanLink GSM 5 Series Preliminary Manual

PROEMION GMBH, Phone: +49 661 9490-600, Fax: -666, info@proemion.com, proemion.com
5. Remove the socket completely and insert the SIM card of your GSM/UMTS
network provider into the socket.
6. Make sure that the SIM card contacts are oriented towards the printed
circuit board and re-insert the socket into the holder until it audibly locks.
7. Make sure that the seal is properly fitted and reassemble the enclosure.
8. Fasten the four enclosure screws (max. torque: 1.5 Nm).
4.5

Connecting to Proemion

After completing the steps described in the previous chapters, you can establish a
connection to Proemion.
1. Re-power the device.
 The green ON LED is constantly on.
The green GSM LED starts to flash (first triple, then double, then single
flash).
2. Wait until the green GSM LED is constantly on.
 The device has established a connection to Proemion.
3. Log in to your Proemion account at portal.proemion.com and check
whether the CANlink GSM / UMTS 5xxx device is logged in.
CANlink GSM / UMTS 5xxx Device Manual
PRELIMINARY 4 Getting started
54