Wiring - PROEMION CanLink GSM 5 Series Preliminary Manual

CANlink GSM / UMTS 5xxx Device Manual
PRELIMINARY 4 Getting started
4.2

Wiring

The following section describes how to connect the device with the components
contained in the Starter Kit.
NOTICE
Using incompatible accessories may damage your equipment.
► If you are using other accessories than those contained in the Starter Kit, make
sure that they are compatible with the CANlink GSM / UMTS 5xxx devices.
In order to perform the initial configuration steps, connect the device to your PC as
described below.
The signals on the CAN connection terminals CAN-Low and CAN-High must match
the signals on the CAN terminals of the connected devices.
GND of the CAN connector has to be connected to CAN-GND.
33
PROEMION GMBH, Phone: +49 661 9490-600, Fax: -666, info@proemion.com, proemion.com