File-Transfer Mode; Connectors; Main Connector - PROEMION CanLink GSM 5 Series Preliminary Manual

PROEMION GMBH, Phone: +49 661 9490-600, Fax: -666, info@proemion.com, proemion.com
3.1.1.2

File-transfer mode

In this operation mode the CANlink GSM / UMTS 5xxx either logs specific CAN
messages and GPS position data according to its configuration and sends them in
a special format to the Proemion server or a CANopen
files of any format to the Proemion server using the CANlink GSM / UMTS as a
kind of gateway or router to the Proemion server. The devices have an internal
non-volatile memory which allows to store the files in case of a GSM outage. When
the connection is recovered the files are sent to the server automatically.
3.2

Connectors

CANlink GSM / UMTS 5xxx is equipped with the following connectors:
•
1x Main connector
•
1x GSM connector
•
1x GPS connector (models with GPS functionality only)
3.2.1

Main connector

The main connector serves for
•
connecting the device to the CAN bus
•
supplying the device with power
Therefore, CANlink GSM / UMTS 5xxx has to be connected to the CAN bus in
order to operate.
NOTICE
► Do not connect the housing to Ground externally. This will suspend the reverse
voltage protection of the power supply. Applying a reversed voltage in this case
will destroy the supply circuits.
► To avoid damage to the device, connect/disconnect the main connector only if
the power supply to the device is switched off.
CANlink GSM / UMTS 5xxx Device Manual
PRELIMINARY 3 Functionality and features
®
master controller can send
19