Operating Modes; Real-Time Mode - PROEMION CanLink GSM 5 Series Preliminary Manual

PROEMION GMBH, Phone: +49 661 9490-600, Fax: -666, info@proemion.com, proemion.com
As a standard solution for this, Proemion offers various software and server
solutions:
•
With Proemion Real-Time, you can access CAN data of monitored
machines or vehicles in near real-time – regardless of your current
location.
•
The Proemion Web Portal solution provides comprehensive options for
machine park and fleet management via the Internet, such as reporting,
optimizing routes and processes or theft protection with the help of
geofencing.
For more detailed information on Proemion functionalities, refer to chapter

3.1.1 Operating modes.

For further information about a standard or customized solution see the Proemion
website www.proemion.com
If you want to integrate CANlink GSM / UMTS 5xxx into your own infrastructure and
require further information, please contact our support team at
support.rmcan.com
For more detailed information on using the RM System Tools, please refer to the
corresponding Software Manuals. You can find these manuals on the RM System
Tools CD.
3.1.1 Operating modes
CANlink GSM / UMTS 5xxx can be operated in two different modes:
•

Real-time mode

•
File-transfer mode
3.1.1.1 Real-time mode
CAN messages are received by the device and sent via the Proemion server to the
remote PC. On this computer there may be an analysis software which can handle
the CAN messages. A bi-directional data transfer is possible. When higher layer
protocols are used, a special firmware and software adaptation may be necessary
due to the delay times caused by the GSM/UMTS network. For this operation a
permanent connection (GSM/UMTS coverage) is necessary.
CANlink GSM / UMTS 5xxx Device Manual
PRELIMINARY 3 Functionality and features
18