Initial Configuration - PROEMION CanLink GSM 5 Series Preliminary Manual

PROEMION GMBH, Phone: +49 661 9490-600, Fax: -666, info@proemion.com, proemion.com
4.3

Initial configuration

After connecting all components as described above, you need to perform some
initial configuration steps with the help of the RMsys Configurator software.
The initial configuration requires a physical connection to the PC.
With real-time access, you will additionally be able to configure the device remotely
via a Proemion Internet connection after completing the steps described in this
section.
Make sure that the device's LEDs show the following light characteristics:
LED Light characteristics
ON constantly on green
GSM flashing green,
then red
GPS flashing green,
then constantly on green
models with GPS
functionality only
Tab. 4-1 LED states – Device ready for initial configuration
CANlink GSM / UMTS 5xxx Device Manual
PRELIMINARY 4 Getting started
Description
Power supply inside
specified values
Trying to connect to a
server, then GSM/UMTS
error because there is no
SIM card inserted
No valid GPS data
available, then valid GPS
data available
39