Maintaining The Base Adjustment - Invacare Low Profile RPL450-2 Owner's Operator And Maintenance Manual

MAINTENANCE
600 lbs Swivel Bar
450 lbs Swivel Bar
FIGURE 7.4 Replacing the Swivel Bar

Maintaining the Base Adjustment

NOTE: For this procedure, refer to FIGURE 7.5.
The base adjustment should not require any attention other than:
1. Check that the legs are square when in the closed position.
2. Place a square on the inside of the legs and base to determine the 90° alignment.
3. Adjust the linkage rods until 90° alignment is achieved.
Square Linkage Rods
Linkage Rod
FIGURE 7.5 Maintaining the Base Adjustment
39
Part No. 1145810 Electric Portable Patient Lift