Invacare Low Profile RPL450-2 Owner's Operator And Maintenance Manual page 25

Electric portable patient lift
Hide thumbs Also See for Low Profile RPL450-2:
Table of Contents

Advertisement

Make sure there is an audible click when mounting the battery on the battery
charger to confirm proper mounting. Otherwise, injury or damage may occur.
3. Place the battery on the battery charger as shown in FIGURE 3.5. Make sure there is 
an audible click.
NOTE: The charge LED will illuminate. When charging is complete, charge LED will stop 
illuminating.
NOTE: A battery needing to be fully recharged will take approximately four hours.
4. Lift up on the handle on the back of the battery.
5. Lift the battery up and out of the battery charger.
6. Reinstall the battery onto the control box as shown in FIGURE 3.5. Make sure there is 
an audible click.
Handle (STEPS 1, 2, 4, and 5)
Audible Click
(STEPS 3 and 6)
Part No. 1145810
CAUTION
Battery
FIGURE 3.5 Charging the Battery
OPERATING THE PATIENT LIFT
Battery
Charger
(STEP 3)
Control
Box
(STEP 6)
25
NOTE: The battery 
mounts to the control 
box and battery 
charger as shown.
Electric Portable Patient Lift

Advertisement

Table of Contents
loading

This manual is also suitable for:

Low profile rpl600-2

Table of Contents