Cleaning The Sling And The Lift; Replacing The Boom Actuator - Invacare Low Profile RPL450-2 Owner's Operator And Maintenance Manual

Cleaning the Sling and the Lift

The sling should be washed regularly in water temperature of 180°F (82°C) and a
biological solution. A soft cloth, dampened with water and a small amount of mild
detergent, is all that is needed to clean the patient lift. The lift can be cleaned with non‐
abrasive cleaners.

Replacing the Boom Actuator

DO NOT overtighten the nut and bolt. This damages the mounting bracket.
NOTE: For this procedure, refer to FIGURE 7.2.
1. Remove the nut, washer and shoulder bolt that secure the boom actuator to the mast
mounting bracket.
2. Rest the boom on your shoulder and remove the nut, bolt, plastic bushing and pinch
guard from the boom mounting bracket.
3. Remove the boom actuator assembly.
4. Reverse steps for installation.
Part No. 1145810
CAUTION
Mast
Bushing
FIGURE 7.2 Replacing the Boom Actuator
37
MAINTENANCE
Boom
Pinch
Guard
Electric Portable Patient Lift