Save】Save Settings - RGBlink C1US Quick Start Manual

【SAVE】Save Settings
Push the [SAVE] button, the button light is on, and enable the SAVE function.
LCD shows [SAVE] instruction info to assist users complete operation. Meanwhile, part of numeral buttons 0~9
lights are on and parts flash. Buttons with lights on are empty, flashing buttons are used. LCD shows as below
Saving to flashing positions will overwrite previously saved settings. For example, button 1 is flashing, after
pressing button 1, LCD shows
Push【OK】to confirm,【MENU】to cancel.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
SAVE TO
>SAVE1
KEY ON FOR EMPTY
FLASH IS FOR USED
SAVE 1 used，overwrite
support@rgblink.com
Yes<OK>, No
<MENU>
| www.rgblink.com
25 / 28