Advertisement
Click media on the VLC - open network streaming - enter the URL address of RTSP over internet, click
play at the lower right corner to start streaming.
7 Restore factory settings
If the device cannot work normally after modifies the parameters
couldn't search and find the device,
Two methods for restoring factory settings:
1)
If you can login to web page, then via the WEB page, click "Settings—System settings--Restore
factory settings".
2)
If you can't login to web page, press the RESET button for 5 seconds in the bottom of device.
Note:
After restoring factory setting, below parameters will be turned to default value:
Login username and password will be "admin";
IP address will be restored as 192.168.1.168, subnet mask will be 255.255.255.0;
All encoding parameters of video and audio will be restored to default value.
8 Note
To prolong the device life， please unplug the power and keep it properly if you do not use it for a long time.
Contact Information
Headquarter: S601 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
● Tel: +86-592-5771197
● Fax: +86-592-5788216
● Customer Hotline: 4008-592-315
© Xiamen RGBlink Science & Technology Co., Ltd.
● Web: http://www.rgblink.com
● E-mail: support@rgblink.com
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com
please restore factory settings.
8
or forgot internet IP configuration and
Advertisement
