The External Switched- Mode Power Supply - BOCK belluno Assembly And Operating Instructions Manual

The totally easy assembly/disassembly and the spacious instal-
lation compartment for battery and electronics positioned abo-
ve the robust hinged cover make the housing of the doubledrive
stand out. The drive comes with a mains isolation in the mains
plug and has an emergency lowering function.
4.1.2 The external switch-mode power supply SMPS
The SMPS wall power supply (switch-mode power supply) is
an electronic transformer, which has an integrated performance
control. A constant voltage until the maximum load (without lost
in velocity) and a safety against overload are given. The external
transformer offers safety beginning at the wall socket, as there
the line voltage is directly converted into 29V low voltage, with
which the bed is operated. The transformer is connected to the
motor cable and can be changed separately in case of damages.
The wall power supply already corresponds to the upcoming
new European standards for electronic domestic appliances.
In the standby-mode it has an energy consumption of max.0. 5
W. Due to its variable input voltage of 100 V-264 V it is applica-
ble worldwide. With the SMPS power supply alternating elec-
trical magnetic fields are not measurable and in use comparing
to motors with mains isolation even lower (due to the concur-
rent flow).
The wall power supply already corresponds to the upcoming new European standards for electronic domestic appliances. In the standby-mode it has
The external switch- mode power supply
an energy consumption of max.0. 5 W. Due to its variable input voltage of 100V-264 V it is applicable worldwide. With the SMPS power supply alternating electrical magnetic fields are not measurable and in use comparing to motors with mains isolation
> Bock Top Advice
Once a year the 9 Volt bat-
tery of the motor should
be tested and if necessary
exchanged. Furthermore
regular visual inspections
should be done.
even lower (due to the concurrent flow).
21