BOCK belluno Assembly And Operating Instructions Manual page 19

In oder to avoid damages to the cables, the cable installation
should be places off-side potentional damage areas. Also avoid
contact with square-edged componements. Notes for an appro-
priate cable installation can be found in chapter 5. All potentional
risks of exposure to too high contact voltages should be exclu-
ded, as this helps to prevent injuires caused by any electrical
shock. This may especially occur when the mains connection
has been damaged, the leak currents are unacceptable or too
high, or liquids have penetrated the motor housing, e.g. caused
by improper cleaning.
* Bock Hazard Note
The simultaneous use of
electrical devices my cau-
se, especially in the direct
enviorment of the rea-
dy-to operate bed, low
electromagnetic interac-
tions between the electri-
cal devices, such as radio
noises. When such a rare
case occures, you should
extend the distance bet-
ween the devices. Do not
use the same wall socket
or switch off the noisy
device temporarily.
If the bed is not operated
in line with its purpose,
thus silmultaneously with
electrical, medical devices,
you should deactive the
functions of the bed for
the time being. The deacti-
vation can be done by the
integrated locking device
on the back side of the
hand control.
19