Strap Cap Installation Instructions - Sunrise Medical Whitmyer Directions For Use Manual

The STRAP CAP is an accessory option available for the Dynamic Forehead Strap
System. The cap replaces the strap only of the DYNAMIC FOREHEAD STRAP
SYSTEM and is compatible with all DFS System applications.
1. Follow the hardware installation instruction for the DFS System.
2. Follow the fitting instructions for the DFS System.
Sizing the Strap Cap
Include the following step to custom size the cap
to the user's head:
Insert or remove one or both pieces of pre-
shaped foam (A) from the hook and loop pouch
on the inside top of the cap (Fig.1). Inserting or
removing a piece of foam will raise or lower the
cap's position on the head.
READ THE WARNING LABEL ON THE BACK OF THE DFS UNIT
Dynamic Forehead Strap with strap cap option
Warning Label
Forehead Strap
26 | Head Support Instructions

Strap Cap Installation instructions

Pulley Mechanism
Cord
The Strap Cap is compatible
with all Whitmyer Biomechanix,
Dynamic Forehead Strap
systems.
www.jay-seating.com
Tension Adjuster
Strap
Cap
Tension Adjuster
Fig. 1
Foam Insert Pouch
(Cut-Away View)
www.sunrisemedical.com