Contoured Cradle Anterior And Lateral Support Combination - Sunrise Medical Whitmyer Directions For Use Manual

Table of Contents

Advertisement

Available languages

Available languages

Contoured Cradle Anterior and Lateral Support Combination

1. Unbolt bottom collar adapters (Fig. 1, A) from interface plates (Fig. 1,B) and (Fig. 1,C) as shown in Fig. 2.
2. Discard ONE bottom collar adapter (Fig. 2, A).
3. Refer to Fig. 3. Bolt together parts (Fig. 3, A), (Fig. 3, B) and (Fig. 3, C) using bolts (Fig. 3, D) and washers
(Fig. 3, E) being sure to fit them together in the order shown. Tighten securely.
4. Refer to Fig. 4. Attach swingaway lateral bracket (Fig. 4, A) to the anterior / lateral interface plate
assembly (Fig. 4, B) using bolts (Fig. 4, C) and washers (Fig. 4, D). Completed assembly (Fig. 4, E).
Tighten securely. Swingaway lateral mount may be applied left or right or used in unilateral or bilateral
configurations.
5. Refer to Fig. 5. Evenly clamp horizontal ball (Fig. 5, A) between top collar half (Fig. 5, B) and completed
anterior / lateral assembly (Fig. 5, C).
6. See page 17, steps 5-9 for LFC ballrod assembly.
7. See page 15 for Anterior Support Option attachment.
A
E
D
Head Support Instructions
A
B
C
A
Fig. 1
C
B
Fig. 3
A
www.jay-seating.com
Fig. 2
C
D
B
A
B
C
Fig. 5
www.sunrisemedical.com | 17
A
E
Fig. 4

Advertisement

Table of Contents
loading

Table of Contents