Base Plate Assembly Attachment - Sunrise Medical Whitmyer Directions For Use Manual

3-Pad Base Plate Assembly Attachment (Fig. 1)
1. Remove vinyl cover (E) from collar (A). Slide over horizontal ball (C).
2. Loosen rotational bracket (A) collar bolts (B).
3. Clamp mounting system horizontal ball (C) between the rotational bracket collar halves (A). Even
though the knurled balls eliminate unwanted pad movement, the collars must be evenly tightened to
reach their full locking strength. See page 13.
4. Attach pads to screwballs (D).
5. Place vinyl cover (E) on to collar (A).
Single Sub-occipital Base Plate Assembly Attachment (Fig. 2)
1. Remove bolts (B) and discard bottom collar half (E) of single sub-occipital pad.
2. Clamp the horizontal ball (A) between the single sub-occipital pad top collar half (B) and the base plate
collar adaptor (C).
3. Attach occipital pad to screwball (D).
4. Even though the knurled balls eliminate unwanted pad movement, the collars must be evenly tightened
to reach their full locking strength. See page 13.
Head Support Instructions

Base Plate Assembly Attachment

B
E
D
A
C
www.jay-seating.com
D
A
A
C
Fig. 1
B
E
Fig. 2
www.sunrisemedical.com | 11