Plush Anterior And Lateral Support Combination - Sunrise Medical Whitmyer Directions For Use Manual

1. Unbolt bottom collar adapters (Fig. 1, A) from interface plates (Fig. 1,B) and (Fig. 1,C) as shown in Fig. 2.
2. Discard ONE bottom collar adapter (Fig. 2, A).
3. Refer to Fig. 3. Bolt together parts (Fig. 3, A), (Fig. 3, B) and (Fig. 3, C) using bolts (Fig. 3, D) and
washers (Fig. 3, E) being sure to fit them together in the order shown. Tighten securely.
4. Refer to Fig. 4. Attach swing away lateral bracket (Fig. 4, A) to the anterior / lateral interface plate
assembly (Fig. 4, B) using bolts (Fig. 4, C) and washers (Fig. 4, D). Tighten securely. Swingaway lateral
mount may be applied left or right or used in unilateral or bilateral configurations.
5. Refer to Fig. 5. Evenly clamp horizontal ball (Fig. 5, A) between top collar half (Fig. 5, B) and completed
anterior / lateral assembly (Fig. 5, C).
6. See page 17, steps 5-9 for LFC ballrod assembly.
7. See page 15 for Anterior Support Option attachment.
18 | Head Support Instructions

PLUSH Anterior and Lateral Support Combination

C
B
Fig. 1
A
A
B
A
E
Fig. 3
D
Fig. 5
www.jay-seating.com
C
C D
B
B
C
A
Fig. 2
A
A
Fig. 4
www.sunrisemedical.com