Pro Mounting System - Sunrise Medical Whitmyer Directions For Use Manual

1. Unsnap horizontal pivot cover (Fig. 2, B). Angle T-handle or ball driver beneath tab and push up and
outward. Refer to Fig. 1. Index pin on anti-rotational collar (Fig. 1, C) fits in to slot in top of detach
receptacle (Fig. 1, D) to prevent rotation.
2. See pages for pad and accessory attachment / adjustments:
Pad(s)- page 13
Base plate assembly – page 14 Lateral Supports – page 16-18
Adjustments
1. Vertical - Loosen the lever knob (Fig. 1, F) and adjust to the proper height and then lower the stop
collar (Fig. 1, C) be sure to align the index pin in the slot on the detach mount. (Fig. 1, G) Vertical rod
may be rotated for additional angle adjustment of pad/base plate assembly.
2. Horizontal / Angle – Loosen pivot bolts (Fig. 1, A) for depth (Fig.4) and angle (Fig.3) adjustments. It is
not necessary to fully tighten all screws until final position is achieved.
3. Tighten all collar screws evenly to reach full locking strength. See page 11.
4. Snap horizontal pivot cover (Fig. 2, B) in place.
E
F
Head Support Instructions

Pro Mounting System

Anterior Supports – page 15, 20-21
A
B
C
G
D
Fig. 1
A
Fig. 3
www.jay-seating.com
A
E
www.sunrisemedical.com | 9
Fig. 2
Fig. 4