Cobra Xtra Flip Back Mounting System - Sunrise Medical Whitmyer Directions For Use Manual

Assembly
1. Assemble as shown in Fig. 1.
2. See pages for pad and accessory attachment: Pad(s)-
page 11, Anterior Supports – page 13, 18-19, Base plate
assembly – page 12, Lateral Supports – page 14-16
Adjustments
1. Vertical - Loosen the lever knob (Fig. 1, D) and adjust to
the proper height and then lower the stop collar (Fig. 2, C).
Vertical rod may be rotated for additional angle adjustment
of pad/base plate assembly.
2. Depth and Angle Adjustment - Loosen adjustment screws
(Fig. 1, A & B) for depth and angle adjustment. Note angle
adjustment shown in Fig.3.
3. T o flip the headrest back push button (Fig. 4, D) and swing
unit back.
4. Tighten all collar bolts evenly to reach full locking strength.
See page 11.
A
D
Fig. 1
8 | Head Support Instructions

COBRA XTRA Flip Back Mounting System

B
C
Fig. 2
www.jay-seating.com
D
C
COBRA XTRA FB Mounting Hardware
Part Number CBRA5030 (pediatric)
CBRA5010 (adult)
www.sunrisemedical.com
Fig. 3
Fig. 4