Hedz-Up Static Forehead Strap Instructions - Sunrise Medical Whitmyer Directions For Use Manual

Hide thumbs

Table of Contents

Available languages

CAUTION!

Consult with a qualified therapist or rehab technology supplier trained in postural

positioning before installing or adjusting this product.

Read and understand all instructions and warnings before using the product. We are

available to answer questions 8:00 a.m. to 5:00 p.m. Eastern Standard Time. Please

call us at 800-944-8246.

Installation:

Using a 3/16" Allen® wrench:

1. Loosen the rear occipital screwball (A), adjust up or down to provide slot

access.

2. Remove the bolt and washer (B) from the HEDZ-UP mounting bracket.

3. Fit the mounting plate to the front of the occipital plate slot as shown.

4. Replace the bolt and washer (B).

ADJUSTMENT - HEIGHT AND ANGLE:

1. Height Adjustment - Loosen the mounting bolt

(B), sliding the HEDZ-UP assembly up or down.

Retighten.

2. Angle Adjustment - Loosen the left and right strap

bracket adjustment bolts (C). Equally adjust the

bracket angles. Retighten both bolts insuring the

brackets are secure and at the same angles.

ADJUSTMENT - STRAP SIZE:

1. Strap size adjustment (Note: the strap cover has been pushed to

side in this view- Warning - The cover must be in place to supply

padding to the forehead). Slide the strap cover (F) to expose the

hook and loop plastic strap. Separate and re-fasten the hook and loop

fasteners (E) adjusting the overall strap size evenly on both sides.

Note: Adjust the strap to allow a space of one or two fingers between the user's

forehead and the strap allowing the user freedom of movement.

USE INSTRUCTIONS:

The HEDZ-UP strap will flip up (G) for transfers or periods of non-use and flip down to

assume the same position each time.

MAINTENANCE & LAUNDRY INSTRUCTIONS:

Periodically check the overall condition of the HEDZ-UP and immediately retighten loose

fasteners or replace damaged parts.

Washing Instructions - Remove and hand wash the strap in mild detergent. Allow to air

dry. Replace cover if worn or ripped.

Plastic Strap - Replace strap at the first signs of wear, ripping or cracking.

Head Support Instructions