Code Table - Lenze 8200 series Operating Instructions Manual

Configuration

7.2 Code table

How to read the code table:
Column Abbreviation
Code C013
C009*
C001 ¿
[C002]
Name
Lenze
*
Selection 1
Info -
IMPORTANT -
UOMu_^MVMO
7-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Meaning
Code C013
D The parameter of the code can be different in PAR1 and
PAR2.
D The parameter value is accepted immediately (ONLINE).
D The parameter value of the code is always the same in
PAR1 and PAR2, but is always displayed in PAR1.
D The parameter value of the code will be accepted after
pressing SH+PRG.
D The parameter value of the code will be accepted after
pressing SH+PRG but only if the controller is inhibited.
Name of the code.
820X Unit-specific setting possibilites (here for 820X).
Without unit designation the code is valid for all unit types.
Factory setting of the code
The column "Important" contains further information
{1 %} 99 Minimum value {smallest step/unit}
Meaning of the code
Additional, important explanations of the code
maximum value