Legal Regulations - Lenze 8200 series Operating Instructions Manual

1.3 Legal regulations

Labelling Labelling
Nameplate
Lenze controllers are
unambiguously designated by
the content of the nameplate
Application 82XX frequency inverter
as directed
D must only be operated under the conditions prescribed in these Instructions.
D are components
- used for open and closed loop control of variable speed drives withasynchronous standard
motors, reluctance motors, PM-synchronous motors with asynchronous damping cage.
- used for installation into a machine.
- used for assembly together with other components to form a machine.
D are electric units for the installation into control cabinets or similar enclosed operating housing.
D comply with the requirements of the Low-Voltage Directive.
D are not machines for the purpose of the Machinery Directive.
D are not to be used as domestic appliances, but only for industrial purposes.
Drive systems with 82XX frequency inverters
D comply with the EMC Directive if they are installed according to the guidelines of CE-typical drive
systems.
D can be used
- on public and non-public mains.
- in industrial as well as residential and commercial premises.
D The user is responsible for the compliance of his application with the EC directives.
Any other use shall be deemed inappropriate!
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Preface and general information
CE mark Manufacturer
Conforms to the EC Low Voltage Lenze Drive Systems GmbH
Directive
Postfach 10 13 52
D-31763 Hameln
UOMu_^MVMO
1-3