Danfoss VLT FCM Series Manual page 74

This value is updated every 20 ms.
543 Data read-out: Terminal 2, analogue input
(ANALOG INPUT 2)
Value:
Unit: X.X V
Function:
This parameter can be read out via the serial
communication port.
Description of choice:
The value shown indicates the signal value on terminal 2.
The scaling (parameters 338 and 339) does not
influence the read-out. Min. and max. are determined
by the offset and gain adjustment of the AD-converter.
This value is updated every 20 ms.
= factory setting. () = display text [] = value for use in communication via serial communication port
74
®
VLT FCM Series
MG.03.H3.02 - VLT is a registered Danfoss trademark