2.4
FO terminal compartment: close
Figure 7:
AUMA plug/socket connector SDE bus
[1]
Cover
[2]
Screws for cover
[3]
O-ring
[4]
Cable entries for fibre optic cables
[5]
Blanking plugs
1.
Clean sealing faces of cover [1] and housing.
2.
Apply a thin film of non-acidic grease (e.g. petroleum jelly) to the sealing faces.
3.
Check whether O-ring [3] is in good condition, correctly insert O-ring.
4.
Fit cover [1] and fasten screws [2] evenly crosswise.
5.
Fasten cable glands with the specified torque to ensure the required enclosure
protection.
FO connection
7