Technical Data; Fo Connection Board - AUMA AUMATIC AC 01.2 Short Instructions

5.

Technical data

Information
5.1

FO connection board:

FO connection
Channels (optical)
Data rate:
Transmission type
Propagation delay
Fibre
Optical budget
Network range max.
Wave length
Operation temperature
Power supply
The following technical data includes standard and optional features. For detailed
information on the customer-specific version, refer to the order-relevant data sheet.
This data sheet can be downloaded from the Internet at http://www.auma.com in
German and English (indication of commission number required).
ST (BNC connector) or SC (Snap-in connector)
For line topology: 2 x IN/OUT
For star topology: 1 x IN/OUT
For loop topology: 2 x IN/OUT
Maximum 1.5 Mbit/s
Automatic recognition of the following baud rates:
9,6KBit/s, 19,2KBit/s, 45,45KBit/s, 93,75KBit/s, 187,5KBit/s, 500KBit/s, 1,5 MBit/s
Half-duplex
RS-485 ↔ Fiber optic cable: < 3 TBit
Tx ↔ Rx: 11 TBit
Multi-mode 62.5 (50)/125 m
Single-mode 9/125 m
For multi-mode fibre: 13 dB
For single-mode fibre: 17 dB
62.5/125 m glass fibre (multi-mode):
2,500 m (FO cable damping max. 2.0 dB/km, without additional damping)
50/125 m glass fibre (multi-mode):
2,500 m (FO cable damping max. 2.0 dB/km, without additional damping)
9/125 m glass fibre (single-mode):
15 km (FO cable damping max. 0.4 dB/km, without additional damping)
1,310 nm
–25 °C to +50 °C
24 V DC/70 mA, internally supplied via power supply unit of the AUMATIC. External voltage
supply of the AUMATIC 24 V DC/500 mA possible. Only once the AUMATIC is operated on
external voltage supply will the bus remain uninterrupted in case of a loss of supply voltage.
Technical data
13