Vertiv NetSure 7100 Series Installation Manual page 27

Figure 11:
Installing an Optional Bullet Nose Type 6-Position GMT Distribution Fuse Block (P/N 549017)
Vertiv | NetSure 7100 Series Installation Manual (IM582127000100) | Rev. H
1. Remove two lug terminal busbars for positions to be occupied
by GMT Fuse Block. Remove plastic busbar plugs first.
Plastic Busbar Plugs
2. Plug in GMT Fuse Block.
Part of P/N 549017
3. Connect supplied jumper from
GMT Fuse Block to Return Bar.
Torque to 75 in-lbs.
Part of P/N 549017
RTN Bar
27