Komatsu ecot3 PC300LC-8 Shop Manual page 993

50 Disassembly and assembly
2) Cut the tip of the adhesive nozzle (14) so
that dimensions (q) and (r) will be as fol-
lows.
q Dimension (q): 10 mm
q Dimension (r): 15 mm
3) Set adhesive cartridge (12) to caulking
gun [7].
a An electric caulking gun is more effi-
cient.
PC300, 350-8
4) Remove the release tape of dam rubber
on the glass adhesive side.
5) Apply adhesive (15) to the outside of dam
rubber (6) of the operator's cab.
a Apply adhesive (15) with dimensions
(s) and (t) for dam rubber (6) of oper-
ator's cab (8).
q Dimension (s): 10 mm
Dimension (t): 15 mm
q
a Apply adhesive (15) higher than dam
rubber (6).
a Apply the adhesive evenly with same
height level.
a Apply adhesive (15) additionally to
additional dam rubber (6a) of right
side window glass and additional dam
rubber (6b) of door lower window
glass.
SEN02641-02
11