Danfoss VLT AQUA Instruction page 111

VLT AQUA Low Harmonic Drive Instruction
Manual
3-86 Check Valve Ramp End Speed [RPM]
Range:
0 [RPM]* [0 – Motor Speed Low Limit [RPM]] Set the speed in [RPM] below Motor Speed Low Limit where the Check Valve is expected to be closed
3-87 Check Valve Ramp End Speed [Hz]
Range:
0 [Hz]* [0 – Motor Speed Low Limit [Hz]]
Function:
and the Check Valve no longer shall be active.
Function:
Set the speed in [Hz] below Motor Speed Low Limit where the Check Valve Ramp will no longer be
active.
®
MG.20.T1.22 - VLT is a registered Danfoss trademark
6 How to Program the Low Harmonic Drive
6
6-19