Connect Multiple Remote Shelves - Polycom SpectraLink 6300 MCU Install Manual

Connect Multiple Remote Shelves

PN: 1725-36126-001_K.doc
If the remote site consists of more than one remote shelf, the shelves
must be connected to each other.
Connect the IPC cable from the
Module on the first shelf to the
on the next shelf. Repeat until all shelves are connected.
Note that the port of the first module is not used.
IN
The following diagram shows the T1 Remote Module connections at
the REMOTE site.
Install System at Remote Site
port of the T1 Remote
Sync OUT
port of the T1 Remote Module
Sync IN
23