Red Pitaya HAMlab 80-10 10W User Manual page 72

Red Pitaya HAMlab Documentation
Danger
FUSE CURRENT RATING SHOULD NOT BE HIGHER THAN 3.15A AMPS! FAILURE TO PROPERLY USE THIS
SAFETY DEVICE COULD RESULT IN DAMAGE TO YOUR RADIO, POWER SUPPLY, OR CREATE A FIRE RISK.
5.7.5. Chassis ground
This is a thumbscrew for attaching an earth ground to the chassis of the radio. Grounding is the most
important safety enhancement you can make to your shack. Always ground the HAMlab to your station
RF ground using high quality wiring with the length being as short as possible. Braided wire is considered
the best for ground applications. Your station ground should be a common point where all grounds
The manual is made on the site https://trcvr.ru 72