Red Pitaya HAMlab 80-10 10W User Manual page 20

b. Add new Ethernet connection (There is no need to create new network since you can
set static IP settings on the existing network and skip all steps up to step 5. )
3. Select "Ethernet" connection and press "Create" button
4. Select the name of the new Ethernet connections
5. Select "Method – Manual", Press "Add" button and insert:
a. static IP address of your PC (must be different from the IP address of the HAMlab),
b. Net mask (input: 255.255.255.0)
c. Getaway (can be left empty)
The manual is made on the site
Red Pitaya HAMlab Documentation
https://trcvr.ru 20