Red Pitaya HAMlab Documentation
frequency value is shown corresponding to the place where the X cursors are set, and the amplitude
value where the Y cursors are set. Cursor delta values are useful for measuring signal harmonics and
relative ratios between amplitudes and frequencies.
3.2.1.3. RANGE
The range settings are used to set a frequency span. This feature is useful when the frequency range of
interest is smaller than the full frequency range of the Spectrum analyzer application.
3.2.1.4. PEAK DETECTION
During the measurement, peak values of the signal spectrum are measured and shown on the "Peak
Values" field. Peak values are max values of the signals spectrum regardless of the selected frequency
range. This peak finding prevents not seeing peak values which are outside the selected frequency span.
The manual is made on the site
https://trcvr.ru
43