Red Pitaya HAMlab 80-10 10W User Manual page 66

5.2.1. Oscilloscope
Input channels
Input channels connector
Bandwidth
Resolution
Memory depth
Sampling Rate
Input range
Input coupling
Minimal Voltage Sensitivity
External Trigger connector
Input coupling
5.2.2. Signal generator
Output channels
Output channels connector
Bandwidth
Resolution
Signal buffer
Sampling Rate
Output range
Frequency Range
Output impedance
External Trigger connector
5.2.3. Spectrum analyzer
Input channels
Input channels connector
Bandwidth
Dynamic Range
Input noise level
Input range
Frequency Range
Input impedance
Spurious frequency components
5.2.4. Logic analyzer
Input channels
Max. sample rate
Fastest input signal
Supported protocols:
Input voltage levels
Threshold:
Input impedance
Sample depth
Trigger resolution
Min. detectable pulse length
The manual is made on the site
Red Pitaya HAMlab Documentation
5.2. Measurement instruments specifications
2
BNC
50 MHz
14 bit
16384 Samples Max.
125 MS/s
+/- 1 V or +/- 20 V
AC/DC
±0.244 mV / ±2.44 mV
BNC
AC/DC
2
BNC
50 MHz
14 bit
16384 Samples Max.
125 MS/s
+/- 1V
0 - 50 MHz
50 ohm
BNC
2
BNC
0 - 62 MHz
-80dBm
< -119 dBm/Hz
+/- 1V
0 - 50 MHz
1 MΩ / 10 pF
-90 dBFS Typically
8
125 MS/s
50 MHz
I2C, SPI, UART
2.5 V - 5.5 V
0.8 V for logic low
2.0 V for logic high
100 kOhm 3 pF
1 MS (typical*)
8 ns
10 ns
https://trcvr.ru 66