Red Pitaya HAMlab 80-10 10W User Manual page 37

o slope

Trigger modes:
o auto,
o normal and
o single triggering

Input calibration wizard

Cursors

Measurements

Math operations

Signal generator controls:
o waveform,
o amplitude,
o frequency,
o phase
AUTO SCALE: Automatically sets up the Oscilloscope to best display the input signal. By pressing this
button, the voltage axis and the time axis are set so that at least one full period of the signal will fill the
screen.
The manual is made on the site
Red Pitaya HAMlab Documentation
https://trcvr.ru 37