Red Pitaya HAMlab 80-10 10W User Manual page 3

Red Pitaya HAMlab Documentation
Warning
This radio has been configured to operate in your country according to your nation's regulations when
required. It may operate on frequencies which are not allowed for public use. You are required to have a
valid amateur radio license of an appropriate class from your government to have the privileges to
operate on amateur radio frequencies. Except those actions which have been described in this HAMlab
documentation, no other manipulations to the radio are allowed. The unit must only be opened and/or
serviced by a qualified technician. These documents contain important information for safe operation,
please study it!
Radio frequency energy (RF) from transmitters can interact with some electronic devices, such as
cardiac pacemakers and defibrillators. Please refer to the implanted pacemaker or defibrillator
manufacturer's instructions with respect to precautions to be taken in the vicinity of an amateur radio
transmitter. If any interaction or interference with a pacemaker or implanted defibrillator is suspected,
STOP transmitting immediately!
Warning
This product shall only be powered by an external power supply providing 13.8 VDC power supply that
can provide at least 4A of constant power. The power supply used with Red Pitaya HAMlab must comply
with relevant regulations and standards applicable in the country of use.
Danger
NEVER CONNECT THE +13.8V POWER CONNECTOR DIRECTLY TO AN AC OUTLET. This may cause a fire,
injury or electrical shock.
Danger
This product is intended for use with low voltage energy sources and signals. NEVER MEASURE OR
CONNECT TO VOLTAGE SOURCES THAT ARE ABOVE 30V!
Caution
Avoid operation this unit in direct sunlight or other areas of extreme heat, excessive vibrations or
mechanical force. This product should be operated at normal conditions with ambient temperatures not
exceeding 40oC (86oF) and should not be covered.
Caution
When using earphones, use caution when adjusting the volume prevent any harm to your hearing.
Caution
The connection of unapproved external devices to the unit may damage the unit and/or affect
compliance with manufacturer's instructions or applicable standards and shall invalidate the warranty.
Please follow the instructions in user manual in order to understand how to properly and safely connect
external devices and what are voltage/current limitations of HAMlab inputs/outputs.
Caution
This product should be placed on a stable, flat, nonconductive surface and should not be contacted by
conductive items.
Danger
This product is not a toy. Keep the product and all of its parts out of reach of children.
Caution
This product should not be over clocked and should not be or modified in the hardware components as
this may result in excess heating of certain components or may damage the product.
The manual is made on the site https://trcvr.ru 3