Red Pitaya HAMlab 80-10 10W User Manual page 10

Red Pitaya HAMlab Documentation
2.4.1.2. Front panel connections
Microphone (1)
Note
More information about compatibility of microphone, key and headphones and front panel connections
in general can be found in the Front panel controls and connections section.
Iambic Morse Code Paddle Keyer (2)
Note
Keyer is supported only with software 0.97-93 or later. Please check for software update.
Phones (3) (optional if speakers are not connected)
2.4.1.3. Turn it on & put HAMlab in SDR mode
1.) Turn on power supply, HAMlab will start automatically. Next time you can momentary press on the
power button to turn it on/off.
2.) Make sure your computer is connected to same local area network as HAMlab.
3.) On your computer start a WEB browser (Chrome recommended).
4.) Type in the HAMlab URL that can be found on the back panel of the HAMlab
HAMlab application page should appear
The manual is made on the site https://trcvr.ru 10